Boat Underwater Light

Boat Underwater Light     

SV20 HID

The Sea Vision SV20 model is our standard xenon light with a 35 watt xenon lamp and 12 or 24 volt ballast. This light is suitable for small boats wanting to utilize 12 or 24 volt DC power and can be installed on sport fishers, center consoles, cruisers and performance boats.

  • The 35W, HID, gas discharge lamp used in this light is a commerci al grade high technology instant re-strike lamp. This lamp will generally reach full brightness in less than 1 minute.
  • Depending upon water clarity conditions, the light beam can reach up to 18 meters (60 feet).
  • Dimensions = 80mm (3.15”) diameter x 128mm (5.04”) long - 2.2 kilograms (5.9 pounds)
  • Construction = Marine bronze - Black anodized marine aluminum alloy - Black delrin
  • Power supply = 12 VDC nominal (15 VDC max) - 3.5 Amps continuo us (18 Amps start up) - Minimum operating temp. -30°C (22°F)

    Or
    Power supply = 24 VDC nominal (30 VDC max) - 1.8 Amps continuous (8 Amps start up) - Minimum operating temp. -30°C (22°F)


Lamp: Life Length: Kelvin Color Temp: Glass Lens: Thickness: Power Supply: Casing Material Dimensions: Weight: Optional Lamp: Installation: Angles Available:
35 watt HID xenon 3,000 hours plus 5100
Lumens: 3600
Borosilicate Glass 9.5mm / 0.38” 12 VDC start up current max. 18 amps, 3.5 amps continuous 24 VDC start up current max. 8 amps, 1.8 amps continuous Marine Bronze
80 mm (3.15”) x 128mm (5.04”)
2.2Kg/5.9lbs 35 watt HID xenon with 10000 Kelvin color temperature Recommended at minimum 6” (152 mm) below waterline between 3-6 feet (1 - 2 meters) apart. (60mm) 2.36” cut out hole Flush

  • Underwater Lights USA, LLC takes pride in providing well designed, high quality and thoroughly tested lights that allow you to “enhance your boating experience”. These lights can be installed in your vessel for aesthetics, to attract fish, for security and safety.
  • The light and electrical cabling should be visually inspected for proper operating condition every six months.
  • Marine growth should be removed from the glass using a soft brush to allow both heat and illumination to exit the light.
  • The body of the light must be electrically joined to the vessels grounding and cathodic protection system. Failure to do so may cause light corrosion cause light corrosion.
  • Warranty

    Underwater Lights ® USA, LLC warrants this light to be free from defects in workmanship and materials for a period of two years from the date of original purchase. Further, misuse, abuse, impro per installation, neglect, improper shipping, damage caused by disasters such as fire, flood and lightning, unauthorized repair or modifications will void said warranty. Should your light prove defective during the warranty period, promptly contact Underwater Lights ® USA, LLC for an RMA number and then return the light freight prepaid with the RMA number clearly marked on the outside of the shipping container.