HP 12

LED Spreader Lights Marine LED Marine Lights      

These intense LED spreaders incorporate a unique patent pending feature of high and low operation which changes the light pattern at the flick of a switch. Your neighbors at the marina will be grateful!


  • 5 amps at 12V DC, 2.5 amps at 24V DC
  • 1.7 amps at 32V DC, 1 amp at 120V AC
  • 12-36V DC systems, 100-240V AC
  • 7200 lumens total output
  • Compare to 120V 500W halogen
  • 36 high power LED's deliver cool, efficient daylight-white illumination. This is the most powerful spreader lamp on the market.
  • Purpose built for the marine industry to IP-67 standards. Constructed of marine grade aluminum. Closely matches white gelcoat finishes.
  • Unique, patented high and low operation. "Low beam" setting keeps stray light from irritating marina neighbors with bright flood lamps. As an added benefit also uses half power for greater battery life. (DC lamps only
  • Highly efficient optics deliver light where needed, for much more usable light at the workspace.
  • Less energy is wasted as heat. Combinations of spot and flood beams are available. Spot (“low”) and flood optics are standard. Flood beams are 65 degrees. See the note on the following page about the “FF” flood option.
  • Constant-current drivers with 96% circuit efficiency, drawing only a fraction of the power of halogen (incandescent) lighting systems and much more efficient than most other power LED luminaires. Such efficient operation means they draw much less electrical current and produce less heat than halogen floods, preserving battery power and improving safety.
  • Exterior surfaces are primed with Liquiguard PC for aluminum, then TCIG powder coated for a durable finish.
  • Available with polished 316 stainless steel bezel.


  • Custom bezels are available:
    Sizes
    Materials (316SS - Stainless Steel, Bronze, Aluminium)
    Finishes & colors (Polished or Powder Coated)

HP 12 Marine LED Spreader Lights

Item # Description List Price
005.363155.012 Floodlight Spreader 12V DC LED 12xCW HP12 $1049.00   Call For Special Pricing

NOTE: NOTE: Additional ventilation (as used with halogen lamps) is required with this lamp. Heat sink must not be modified. Lamp MUST be installed in an area of sufficient air space to permit cooling from the heat sink.

The HP12 is designed to replace 500 watt, 120 volt AC fixture applications with a high intensity beam of cool white light of approximately 6500K. Standard optic configurations provide a 65 degree flood beam with a “hot-spot” in the center from the row of spot beam optics, and outshines the 500 watt fixture, without the wasteful stray light. The 500 watt fixture has a wider flood beam. If desired beam is wider than the HP12's standard configuration, please order option code “FF” for frosted bezel glass. This option will provide a wider, more diffuse beam and less of a “hot spot” in the center. Please note that while this option still provides half power wiring, the wider flood beam may be irritating to marina neighbors. The “FF” option code has not been tested against a 500 watt fixture.

AC powered versions

AC lamps are shipped as a kit with a power supply. ONLY connect the lamp to the LED driver power supply, RACD60-2100/IP67. It is highly recommended to place the lamps as close to the drivers as possible, within 10 feet of the lamps, as stated by the LED and driver manufacturer. Warranty is reduced from 5 years to 2 years for longer than 10 feet of separation for this reason.

LED Spreader Lights Marine LED Spreader Light Marine