SMX101

Adding underwater lighting to your vessel has never been easier. One small cable hole and three mounting screws is all it takes. The Lumishore e-lite Surface Mount underwater LED light competes with other LED models costing over twice as much. Thanks to an Active Thermal Rollback system, the Surface Mount e-lite can be used both above or below the waterline, at dock or underway. Compact and with a very slim profile, the Surface Mount e-lite is easily installed on any size vessel, and comes in a wide variety of colors and power levels.

• Suitable for transom or hull-side mounting
• Recommended for boats up to 18m/60ft
• Fixture Lumens=3,600. Life expectancy: 50,000+ hours
• Profile: 16mm/0.7"; Diameter: 107mm/4.5"
• Surface mount, requires 6mm/0.25" cable entry hole
• Lens: Toughened BK7 Borosilicate, 90° beam angle
• Corrosion-proof, growth resistant advanced polymer body
• Input voltage: 9-31 Volts; 3 Amps @ 12V, 1.5 Amps @ 24V
• Over voltage/current, reverse polarity, and thermal rollback protection
• Can be used above or below the waterline
• LED Power-HICOB Array
• Internal Driver

• RM-12: Wireless Keyfob Remote (12 Volt only)
• DLX-KIT: For mounting a Surface Mount light to a dock, piling, or a transom where there is no access to run wires
• DLX-ARM: Pivot arm to allow Surface Mount light to be pivotted out of the water when installed on a dock. DLX-KIT required.