These intense LED spreaders incorporate a unique patent pending feature of high and low operation which changes the light pattern at the flick of a switch. Your neighbors at the marina will be grateful!
|Item #||Description||List Price|
|005.363166.000||Floodlight Spreader 12V DC LED 6xCW HP6|
NOTE: Ventilation is required. Lamp MUST be installed in an area of sufficient air space to permit cooling from heat sink. Wire chase should be sufficient. If there is less than 2 inches behind the heat sink, ventilation must be added.
* The HP6 is designed to replace the 300 watt, 120 volt AC fixture applications with a high intensity beam of cool white light of approximately 6500K. Standard optic configurations provide 50 degree flood beam with 41x20 degree oval-beam optics, and outshines the 300 watt fixture, without the wasteful stray light.
The 300 watt fixture has a wider flood beam. If desired beam is wider than the HP6's standard configuration, please order option code “FF” for frosted bezel glass. This option will provide a wider, more diffuse beam and less of a “hot spot” in the center. Please note that while this option still provides half power wiring, the wider flood beam may be irritating to marina neighbors. The “FF” option code has not been tested against a 300 watt fixture.
The hardware kit for the HP6-B includes the stainless steel bracket, carriage bolt with locknut and washer, nylon bushings, stainless steel truss head screws and Loctite thread locker.