Underwater LED Boat Lights Review

Underwater LED Boat Lights Review     

SV19 HID

This light utilizes a 50 watt HID xenon lamp and 50 watt ballast. It is the only underwater light with a built-in igniter and ballast in the actual body of the casing. It is the brightest 12 or 24 volt DC light available. It can be installed on small to mid size boats including center console, sportfishers and cruisers. The vessel must be hauled out for installation although lamp change and any maintenance can be done in the water from within the hull.

  • The 50W, HID, gas discharge lamp used in this light is a commercia l grade high technology instant re-strike lamp. This lamp will generally reach full brightness in less than 1 minute.
  • Depending upon water clarity conditions, the light beam can reach up to 21 meters (70 feet).
  • Dimensions = 105mm (4.13”) diameter x 189mm ( 7.44”) long - 1.9 kilograms (4.2 pounds)
  • Construction = Marine Bronze - Black Anaodized Aluminum Alloy - Black Delrin
  • Power supply = 8-16.8VDC – 4–4.6 Amps running (8 Amps max) - 8 Amp fast blow fuse - Minimum operating temp -30°C (-22°F)

    Power supply = 18-33VDC – 1.8–2.4 Amps running (5 Amps max) - 8 Amp fast blow fuse - Minimum operating temp -30°C (-22°F)


Lamp: Life Length: Kelvin Color Temp: Glass Lens: Thickness: Power Supply: Casing Material Dimensions: Weight: Optional Lamp: Installation: Angles Available:
50 watt HID xenon 3,000 hours plus 3900
Lumens: 5300
Borosilicate Glass 12.7mm / 0.5” 12VDC - 4-4.6 amps running, max 8 amps startup 24VDC - 1.8-2.4 amps running, max 5 amps startup Marine Bronze / Marine Aluminum
105 mm (4.13”) x 189 mm (7.44”)
1.9Kg/4.2lbs 35 watt HID xenon with 5100 Kelvin color temperature

35 watt HID xenon with 10000 Kelvin color temperature
Recommended at minimum 10” (250mm) below the waterline between 3 - 6 feet (1 - 2 meters) apart. (80mm) 3.15” cut out hole Flush

  • Underwater Lights USA, LLC takes pride in providing well designed, high quality and thoroughly tested lights that allow you to “enhance your boating experience”. These lights can be installed in your vessel for aesthetics, to attract fish, for security and safety.
  • The light and electrical cabling should be visually inspected for proper operating condition every six months.
  • Marine growth should be removed from the glass using a soft brush to allow both heat and illumination to exit the light.
  • The body of the light must be electrically joined to the vessels grounding and cathodic protection system. Failure to do so may cause light corrosion cause light corrosion.
  • Warranty

    Underwater Lights ® USA, LLC warrants this light to be free from defects in workmanship and materials for a period of two years from the date of original purchase. Further, misuse, abuse, impro per installation, neglect, improper shipping, damage caused by disasters such as fire, flood and lightning, unauthorized repair or modifications will void said warranty. Should your light prove defective during the warranty period, promptly contact Underwater Lights ® USA, LLC for an RMA number and then return the light freight prepaid with the RMA number clearly marked on the outside of the shipping container.